ZTSE4749 Rear Crankshaft Oil Seal and Wear Sleeve Installer Tool

SKU# ZTSE4749

California Residents: Warning

Be the first to review this product

Item Condition: new

$592.15

Out of stock

Not sure if this is what you need? Give us a call and we'll look it up for free if you purchase the tools or parts from us!

description

ZTSE4749 Rear Crankshaft Oil Seal and Wear Sleeve Installer Tool J-41163

Replaces ZTSE4374 & ZTSE4374B

Applications: DT466E, I530E, DT570

Attention: Most workshop manuals are incorrect. The only way to make sure you get the correct installer is to check your seal number or measure the diameter of your crankshaft.

  • This tool is used on cranks that are 5-1/2" in diameter (Seals 1817867C93, 1817867C92, 1817867C91, 1817767C1, 1817865C1, 10054VX, 5-13851, and 1841139C93 Housing Kit)
  • -
  • Use ZTSE4637 or ST-153 is used on cranks that are 6-1/8" in diameter (Seals 1841938C1)
  • -
  • Use ZTSE2535C or ST-154 is used on cranks that are 5" in diameter (Seals 1809964C92, 686444C91)

1994 and 1999 are split years and you must measure the crank to determine the correct tool.

additional

Manufacturer SPX/Bosch (OTC Rotunda Kent-Moore Miller)
Brand SPX/Bosch (OTC Rotunda Kent-Moore Miller)
Storage Code C-13

Warning: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm.

For more information go to www.P65Warnings.ca.gov.

Terms and Conditions

Is your crankshaft 5-1/2” in diameter? If not, you’re ordering the wrong tool.

Attention: Most workshop manuals are incorrect. The only way to make sure you get the correct installer is to check your seal number or measure the diameter of your crankshaft.