A/C Recover, Recycle, Recharge Machine Hybrid And Nonhybrid Vehicles

It can be used to service standard A/C systems that use a PAG lubricant oil as well by utilizing the on board hose flush feature that minimizes oil cross contamination to less than 0.1 percent.Meets new refrigerant recovery standards J-2788 for high voltage compressors.

• Fully Automatic operation - Program to recover, vacuum, leak test and charge without operating panel valves.
• A/C system flush - Helps remove any residual oil if the wrong type of oil is injected.
• A/C RRR Machine hose flush - Flushes the hoses of the machine to minimize oil cross contamination levels to less than 0.1% as service is switched between vehicle types.
• Automatic oil drain - Automatically drains system oil captured during recovery.
• Vacuum leak test - Monitors the vacuum level after evacuation and informs the technician if there is a possible leak.

Specifications:
Voltage: 115 volt, 60 Hz
Refrigerant container on-board: 30 lb. (14 kg) vessel (source tank not included)
Operating range: 50 – 120° F (11– 49° C
Recycling filter-drier: 43 cu. in. spin-on type
Pump-free air displacement: 1.5 c.f.m. (36 L/minute)
Dimensions: 44” h x 34” w x 23” d (127 cm x 86.4 cm x 58.4 cm)
Shipping weight: 235 lbs. (106.6 kg)