Bend-Pak BB-2
Blue-Bullet exhaust pipe bender. Includes our BB-2 die package and a dual function end finishing unit for precision OE expansions and flares.
Two separate end finishing units at rear for all necessary flaring and expanding
Knee control and depth-of-bend degree plate for manual bending operations
Includes BB-2 die package (See below)
Comes complete with quick release bending and end finishing dies
Includes high-speed clampless swager and internal expander
Updated bend data system available for automobiles and light trucks dating back to 1960
Clampless swager - easy to use drop-in collars makes swaging operations quick and efficient
Twist-lock tooling - quick change tooling saves time
Integrated power relief control valve - control valve features oversize handles and built in pressure relief system
Pass-through cylinder stem - the top cylinder stem passes completely through the main frame
Rigid frame - a rigid 6 x 6 x 3/8 welded steel tube is used for the main frame
Commercial grade hydraulic cylinders - industrial cylinders provides better performance and reliability
Chrome-molly shafts - all cylinders features hardened chrome-molly shafts that conform to ANSI 92.2 standards
Quick release bending dies - quick change tooling means faster set up times
Precision ground bending head - all bending head surfaces are surface ground within .002 of an inch
Clutter free bending area - controls are enclosed to keep the front obstruction free
Oversize barrel shafts - large 2-1/2 diameter machined steel barrel shafts used in conjunction with oil impregnated bronze bushings provide ultimate dependability and minimum maintenance
Grease fittings - standard grease fittings allow for simple lubrication
Controls - NEMA rated on/off switch box incorporates overload relays that automatically disrupt power supply should an over-current situation occur.
Pressure gauges - know exactly what the system pressures are at all times
Industrial grade casters - large cast iron casters help you easily move the bender around your shop
Adjustable pressure valve - adjust back gate pressure easily with this adjustment screw located right up front
One piece barrel - a one piece solid steel barrel is your assurance that the bending gates stay perfectly aligned with the bending ram
Heat-treated tooling - all machined steel tooling is heat treated for greater service life
Convenient tool trays - keeps your tooling organized
Strong motor - a large 5 HP Baldor energy efficient motor is used for maximum performance
Direct-drive pump - a direct-drive high speed 4 GPM pump is used for
maximum power and performance
Single enclosed bottom cylinder - this single bottom cylinder applies pressure evenly to the back gates and because it is hidden, does not interfere with the tubing
Large capacity reservoir - a large fluid reservoir keeps the hydraulic oil running cooler and contamination to a minimum
Filtered hydraulic system - a canister type oil filter keeps the oil contamination free
Oil sight gauges - allows you to visually inspect oil levels
Over size hose - we purposely use 1/2 high pressure hose for better speed and cooling characteristics
Open sided swager box - means easier access and less chance of crashing tools and damaging the cylinder
BB-2 Die Package
BENDING DIES PIPE COLLARS
QTY. PART NO. TOOLING DESCRIPTION QTY. PART NO. TOOLING DESCRIPTION
1 5R-212 5" Radius Die / 2-1/2" 1 HAC-212 2-1/2" Pipe Collar
1 5R-214 5" Radius Die / 2-1/4" 1 HAC-214 2-1/4" Pipe Collar
1 5R-200 5" Radius Die / 2" 1 HAC-200 2" Pipe Collar
1 4R-178 5" Radius Die / 1-7/8" 1 HAC-178 1-7/8" Pipe Collar
1 4R-214 4" Radius Die / 2-1/4" 1 HAC-134 1-3/4" Pipe Collar
1 4R-200 4" Radius Die / 2" 1 HAC-112 1-1/2" Pipe Collar
1 35R-200 3-1/2" Radius Die / 2" END FINISHING TOOLS
1 35R-134 3-1/2" Radius Die / 1-3/4" QTY. PART NO. TOOLING DESCRIPTION
1 35R-112 3-1/2" Radius Die / 1-1/2" 1 HPF-300 45 / 90-Degree Flare
BACK SHOES 1 DD-134/212 Doming Die
QTY. PART NO. TOOLING DESCRIPTION 2 BFED-134/212 Female Ball Flares
2 BS-212 2-1/2" Back Shoes 1 CFT-200 2" Manifold Flange Tool
2 BS-214 2-1/4" Back Shoes 1 B-212 2-1/2" Male Ball Flange
2 BS-200 2" Back Shoes 1 FP-100 Flattening Plate
2 BS-178 1-7/8" Back Shoes 1 ST-1 Slip-Twist Adapter
2 BS-134 1-3/4" Back Shoes SEGMENT EXPANDERS
2 BS-112 1-1/2" Back Shoes QTY. PART NO. TOOLING DESCRIPTION
HALF SHOES 1 HSA-112 Arbor
QTY. PART NO. TOOLING DESCRIPTION 1 SS-212 2-1/2" Segment Exp.
1 HS-212 2-1/2" Half Shoe 1 SS-214 2-1/4" Segment Exp.
1 HS-214 2-1/4" Half Shoe 1 SS-200 2" Segment Exp.
1 HS-200 2" Half Shoe 1 SS-134 1-3/4"- 1-7/8"Segment Exp.
1 HS-178 1-7/8" Half Shoe 1 SS-112 1-1/2" Segment Exp.
1 HS-134 1-3/4" Half Shoe ACCESSORIES
1 HS-112 1-1/2" Half Shoe QTY. PART NO. TOOLING DESCRIPTION
THREE-QUARTER SHOES 1 TTA-1000 Tool Tray Set
QTY. PART NO. TOOLING DESCRIPTION 2 DPS-150 Pusher Block Springs
1 QS-214 3/4" Shoe / 2-1/4" 1 Manual Instruction Manual
1 QS-212 3/4" Shoe / 2-1/2" 1 Video Instruction Video
SOLID EXPANDER DIES 1 OR-1 Bag / Assorted O-Rings
QTY. PART NO. TOOLING DESCRIPTION
1 STED-212 2-1/2" Exp. Die / 2-1/4" Male Ball
1 STED-214 2-1/4" Exp. Die / 2" Male Ball
1 STED-200 2" Exp. Die / 1-3/4" Male Ball
1 STED-178 1-7/8" Expander Die
1 STED-134 1-3/4" Expander Die
1 STED-112 1-1/2" Expander Die
Specifications
Maximum bending radius: 5" / 127 mm.
Minimum bending radius: 3-1/2" / 89 mm.
Maximum tube capacity: 3" / 76 mm. / .095 wall
Dies supplied ( 202 Die package ): 1-1/2", 1-7/8", 1-3/4", 2", 2-1/4", 2-1/2" **
Top cylinder working force: 60,000 lbs.
Hydraulic filter: 60,000 lbs.
Standard motor: 5-HP / 208-230 VAC / 60 HZ. / 1ph.*
*Special Voltages Available Upon Request.
**Contact factory for metric sizes available. The design, material and specifications are subject to change without notice.
*Shipping is FREE to direct points within the 48-contiguous states. A 5% RATZ Surcharge may apply if shipping to a rural shipping point. It is the buyer's responsibility to unload the freight at their location.
Additional Information
Leasing Available