Circuit Buddy Test Light CB-01

Automotive circuit testers or test lights have been around for quite some time and still is an effective and easy way to do some faultfinding. The standard test light or circuit tester has a sharp point to pierce into the wire and you normally end up poking your finger and that really hurts. In most cases the test lights operates with a globe that indicates a live circuit when doing some auto electrical repairs, faultfinding or even when used to install radios. Although there are a variety of test lights available they are not always practical and easy to use especially when piercing wires, and not always computer safe. Some test lights could cost you thousands in damages to automotive computers or even deploy airbags. If you take a small 3 Watt globe it will cause a current spike of up to 1000 mA that is way over the limit for sensitive electronic circuits. A proper circuit tester should not draw more than 20 mA to be computer save and any rating bellow 20 mA can only be safer to use on those sensitive automotive computers.

Circuit buddy draw less than 20 mA @ 48 Volt and even less when using the test light @ 12 or 24 Volt. The approximate current drawn by circuit buddy are as follows: 1.85 mA @ 6 Volt, 3.7mA @ 12 Volt, 7.4 mA @ 24 Volt and 14.8 mA @ 48 Volt.

Circuit buddy is:   
     
• A test light designed for the automotive industry.
• Suitable to test 6 to 48 Volt systems.
• An LED Logic Probe test light that is safe to use on sensitive electronic circuits, features a red and green LED to indicate a live circuit and polarity (draws less than 20mA @ 48 Volt).
• Easy to use, especially when piercing wires.
• Easy on wires as it reduces piercing damage to wires.
• A practical automotive test light used by DIY and professionals.
• Manufactured from durable materials.