Gear Box Bearing Extractor Master Kit 242

Designed to GRAB HOLD of the INNER RACE OF BEARING like an EAGLE CLAW, when no other surfaces are exposed. Extraction of the bearing is accomplished by rotating the center bolt of 242-Body until the steel ball tip bottoms out on a protruding shaft or blind hole. The 242-Body along with the Extractor Collet and bearing to be extracted, all secured firmly together, work their way up the center press bolt.

THE 242 MASTER KIT IS COMPRISED OF OVER 13 COMPONENTS

THE EAGLE CLAW OF BEARING EXTRACTOR!!!
THE EXTENSION TUBES ALLOWS YOU TO REACH OVER EXTRA LONG SHAFTS!!!
THE ONLY SOLUTION WHEN NO OTHER EXTRACTOR CAN GRAB HOLD OF THE BEARING SURFACE!!!

Applicable:
Gearboxes, Transmissions, Transaxles, Transfer Cases, Wheel Bearing Housing of European, several Asain and Domestic vehicles. International Bearing Numbers: 6204, 6205, 6206, 6304, 6305, 6306. Available as O.E. or replacements from SKF, NSK, FAG, etc., (Federal Mogul, Torrington drop the first digit).

Application Chart:

Part # Fingered Collet Collet Range Grabs hold of inner race O.D.
242-A 8 44.50-41.50mm
242-B 7 37.00-35.00mm
242-C 7 41.00-38.50mm
242-E 8 40.50-38.50mm
242-F 9 42.50-40.50mm
242-G 7 43.50-41.00mm
242-H 7 32.00-30.00mm
242-I 7 48.00-45.50mm