BUILT IN THE USA
This tool comes with a lifetime warranty!
Stallion ST-124 Front Crankshaft Seal and Wear Sleeve Installer J-44645 Alt.
Please note we include the bolt, bearing, washer, and nut with each order.
Applications: ISUZU 6.6L Duramax
Works on seals including 97209341
2001-Later GMT800, 2500HD, 3500 with 6.6 liter Duramax diesel engine The crankshaft front seal is fitted to both the engine block and crankshaft. Fit of the inner and outer seal bodies is critical and any misalignment can result in leakage. ST-124 is designed to install the seal to correct depth and alignment. Place the seal onto the end of the crankshaft. Screw ST-124 into the end of the crankshaft. Turn the forcing screw so the body of the tool can push on seal until it bottoms in the block.
You'll find Stallion Products are widely considered the most heavy duty on the market! This is a high-quality tool and you will be pleased with your purchase. This tool is needed to prevent your seal from leaking. Don't try to save a few bucks at the expense of your engine - know that you're getting quality from Stallion Products.