Warning: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov.
Tap considered wear item/no warranty.
Use This tool for 24 Valve (4 per cylinder) engines with ELECTRONIC injection.
Use ST-S908-UT for 12 Valve (2 per cylinder) engines with ELECTRONIC injection.
Use WT530MPD for 12 Valve (2 per cylinder) engines with MECHANICAL injection.
If you already have aftermarket injector sleeves installed, it is possible that no remover will get them out and you'll have to pull the head. This is not a tooling issue and we won't accept returns after you've attempted to use the tool. This aftermarket tool uses the exact same tap that the OEM tool did before it was discontinued. The reason for the potential issue is that some aftermarket cups have thinner sidewalls so the tap can't get enough bite. You can't simply use a bigger tap because the sidewalls of some aftermarket cups are so thin that you could cut into the head on accident.