Oil Control Valve Seal Remover EN-47966 U

SKU# EN-47966 U

California Residents: Warning

Be the first to review this product

Item Condition: used

Free Next Day Air! Order now and receive by Monday April 22

In Stock!

* Required Fields

Only 1 available!

$161.94
Not sure if this is what you need? Give us a call and we'll look it up for free if you purchase the tools or parts from us!

description

Oil Control Valve Seal Remover EN-47966

Application: High Feature V6 engines - 2.8L, 3.0L, 3.2L, or 3.6L

The camshaft position actuator valve seals are installed with the lips facing outward, and no way to get behind them to use conventional seal removers, such as J-45000. EN-47966 expands it feet into the sides of the seal case, and is then used with either a slide hammer or J-45124 Puller Bridge to remove the seals. Unapproved methods will damage the bore or front cover, and can result in engine damage due to out of specification oil pressure.

additional

Manufacturer SPX/Bosch (OTC Rotunda Kent-Moore Miller)
Brand SPX/Bosch (OTC Rotunda Kent-Moore Miller)
Storage Code R-85

Warning: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm.

For more information go to www.P65Warnings.ca.gov.

Terms and Conditions

I understand that I'm about to purchase a Pre-Owned/Inspected tool. These are typically obtained from dealerships that close. Each piece has been hand-inspected by one of our in-house techs. These are guaranteed to be fully functional. If you'd prefer to purchase a new tool, you can look at the right side of this page to see if we have any available.