Cooler Line Seal Installer J-41239-1A U

SKU# J-41239-1A U

California Residents: Warning

Be the first to review this product

Item Condition: used

Free Next Day Air! Order now and receive by Thursday May 9

In Stock!

Only 2 available!

$121.86
Not sure if this is what you need? Give us a call and we'll look it up for free if you purchase the tools or parts from us!

description

Cooler Line Seal Installer J-41239-1A U

Applications: AF40-6 Transmission

Used to install the cooler line seals into the AF40-6 transmission case. The tool mounts to the case at the cooler line retention bracket. A forcing screw pushes the seal into place. The working end of the installer screw pilots on the ID of the seal. It is not recommended to use a drift or similar device to install the seal as damage could occur to the seal or the case. Also, clearance in the seal area is limited to where driving tools cannot be used.

additional

Manufacturer SPX/Bosch (OTC Rotunda Kent-Moore Miller)
Brand SPX/Bosch (OTC Rotunda Kent-Moore Miller)
Storage Code ZB-4

Warning: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm.

For more information go to www.P65Warnings.ca.gov.

Terms and Conditions

I understand that I'm about to purchase a Pre-Owned/Inspected tool. These are typically obtained from dealerships that close. Each piece has been hand-inspected by one of our in-house techs. These are guaranteed to be fully functional. If you'd prefer to purchase a new tool, you can look at the right side of this page to see if we have any available.