High-Pressure Fuel Pump Installer EN-48896

SKU# EN-48896

California Residents: Warning

Be the first to review this product

Item Condition: new

$123.67

Out of stock

Not sure if this is what you need? Give us a call and we'll look it up for free if you purchase the tools or parts from us!

description

High-Pressure Fuel Pump Installer EN-48896

Applications: High Feature V6 or ECOTEC with SIDI

The SIDI high-pressure fuel pump mounts upwards towards the inside of the head, and must be installed with the camshaft drive lobe on its base circle to prevent damage to the fuel pump. The fuel pump MUST be drawn in evenly in less-than-full-turn increments. The fuel pump rod can be damaged if the pump is drawn into position. EN-48896 fits into the fuel pump mounting bore in the head, and provides a positive indication that the camshaft lobe is on base circle. If the camshaft lobe is not properly positioned, the technician will know from EN-48896 that the engine must be turned until the camshaft lobe is properly positioned.

additional

Manufacturer SPX/Bosch (OTC Rotunda Kent-Moore Miller)
Brand SPX/Bosch (OTC Rotunda Kent-Moore Miller)
Storage Code ZJ-212

Warning: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm.

For more information go to www.P65Warnings.ca.gov.