V6 & 4 Cyl. Fuel Injector Rail Assembly Remover Tool EN-49248

Name: V6 & 4 Cyl. Fuel Injector Rail Assembly Remover Tool EN-49248
SKU: EN-49248

SKU# EN-49248

California Residents: Warning

Be the first to review this product

Item Condition: new

Free Next Day Air! Order now and receive by Tuesday April 30

$190.24

Qty:

Email to a Friend

Not sure if this is what you need? Give us a call and we'll look it up for free if you purchase the tools or parts from us!

description

V6 & 4 Cyl. Fuel Injector Rail Assembly Remover Tool EN-49248 6706

Applications: 4.3L 3.6L 3.0L GDI V6, 2.5L 2.4L 2.0L GDI I-4. Note: If you are working on a 5.3L or 6.2L you will need a quantity of 2 sets.

The fuel rail and injector assembly used on the Hitachi SIDI system on 2010 LF1 3.6L V6 and LAF 2.0L ECOTEC has two seals on each injector, and these seals are installed with very tight tolerances. Once the engine has been run, injector and rail removal is very difficult, and the assembly must be removed as straight as possible to prevent the chance of damaging an injector bore in the cylinder head, or to the mount assembly. Each mount assembly contains an isolator, and cannot have any force applied to the mount for removal. EN-49248 installs in place of the mounting bolts, and reaches under the injector rail near each mount location. The hand wheels on EN-49248 at each mount location are tightened evenly to un-seat all injectors evenly, preventing damage to the injectors, cylinder head, and rail mount assemblies.

additional